The MIC2790/1/3 is ideal for monitoring highly-accurate core voltages that require rapid response in the event of a fault condition. The voltage supervisor IC features a manual reset input, enable input (MIC2793 only), a capacitor-programmable reset timeout delay and both an active-low and active-high reset output.The MIC2790/1/3 monitors system voltages that are in the range of 0.4V to 5.5V, with a typical sense accuracy of 0.5% at +25°C and ±1.0% across ?40°C to +125°C. The IC asserts a reset output when the sense voltage drops below the threshold or when the manual reset is pulled to a logic low. The active-low reset stays low for the duration of the reset timeout delay once the sense voltage returns to normal and the manual reset transitions to a logic high state. The reset timeout delay period is programmable from 1ms to 10s with an external capacitor.The MIC2790/1/3 operates from a low supply voltage of 1.5V to 5.5V, and is rated to operate over the temperature range of ?40°C to +125°C. The MIC2790 is available in a 6-pin TSOT-23 package or a 6-pin 2mm × 2mm × 0.55mm DFN package. The MIC2791 is available in a tiny 6-pin 1.6mm × 1.6mm × 0.55mm DFN package. The MIC2793 is available in a 8-pin 2mm × 2mm × 0.55mm DFN package.

  1.5V to 5.5V operating supply voltage range

  Ultra-fast propagation delay (1μs typically)

  0.4V reference voltage (SNS pin)

  ±1.0% threshold accuracy from ?40°C to +125°C

  Monitored voltage range from 0.4V to 5.5V

  Programmable reset timeout delay (from 1ms to 10s)

  Manual reset input with an internal pull-up resistor

  Active-high enable input pin (MIC2793 only)

  The MIC2790/1/3 features multiple output options:

  Open-drain active-low (/RESET)

  Push-pull active-low (/RESET)

  Push-pull active-high (RESET)

  -40°C to +125°C junction temperature range

  6-pin TSOT-23 (MIC2790)

  6-pin 2mm × 2mm Thin DFN (MIC2790)

  6-pin 1.6mm × 1.6mm Thin DFN (MIC2791)

  8-pin 2mm × 2mm Thin DFN (MIC2793)