Introducing the nanoWatt XLP PIC18F1XK22 Flashmicrocontroller: not too big, not too small… just right! Thisnew family of devices offer all of the advantages of the wellrecognized PIC18F High Performance MCUs; 8-bit,C compiler optimized architecture and an industry leadingperipheral set now available in a low pin-count option. Thesenew 20-pin products include a 16 MHz precision InternalOscillator which can be used with the standard 4X PLL toproduce 16 MIPS of performance (64 MHz @ 3V).Standard analog peripherals include 12 channels of10-bit A/D, Dual Rail-Rail Comparators with improvedinput/output multiplexing and an on-chip selectable FixedVoltage Reference. Digital peripherals include an EnhancedCapture/Compare/PWM (ECCP+) module with PWM steeringand a Master Synchronous Serial Port (MI2C,SPI) modulewith software controllable address masking. These devicesalso feature the SR Latch mode which supports capacitivesensing applications.In addition to these peripherals, the devices feature severalmicrocontroller monitors that provide for reliable operationincluding BOR (Brown Out Reset) with software enable, POR(Power On Reset) and an Extended WDT. The addition ofnanoWatt XLP technology make these devices ideally suitedfor battery powered applications or designs where powerconsumption is constrained.

Features

  C Compiler optimized architecture

  256 bytes data EEPROM

  Linear program memory addressing to 16 Kbytes

  Linear data memory addressing to 512 bytes

Extreme Low-Power Management PIC18LF1XK22 with nanoWatt XLP? Technology

  Sleep mode: 50 nA, typical

  Watchdog Timer: 600 nA, typical

  Timer1 Oscillator: 800 nA @ 32 kHz, typical

Flexible Oscillator Structure

  Precision 16 MHz internal oscillator block:

  Factory calibrated to ± 1%

  Software selectable frequencies range of 31 kHz to 16 MHz

  64 MHz performance available using PLL

  No external components required

  Four crystal modes up to 64 MHz

  Fail-Safe Clock Monitor

  Allows for safe shutdown if peripheral clock stops

  Two-Speed Oscillator Start-up

Special Microcontroller Features

  Operating voltage 1.8V- 5.5V (with low voltage option 1.8V-3.6V)

  Self-reprogrammable under software control

  Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

  Programmable Brown-out Reset (BOR)

  Extended Watchdog Timer (WDT) with on-chip oscillator and software enable

  In-Circuit Serial Programming? (ICSP?) via two pins

  In-Circuit Debug via two pins

Peripheral Highlights

  12 Ch. 10-bit Analog-to-Digital (A/D) Converter module:

  2 rail-to-rail Analog Comparators module with:

  Voltage Reference module with:

  Programmable on-chip voltage reference (CVREF) module (% of VDD)

  Selectable Fixed voltage reference (FVR) with multiple reference voltages

  17 I/O pins and 1 input only pin:

  High current sink/source 25 mA/25 mA

  Three external interrupt pins

  Four Timer modules:

  3 16-bit timers/counters with prescaler

  1 8-bit timer/counter with 8-bit period register, prescaler and postscaler

  Enhanced Capture/Compare/PWM (ECCP) module with PWM output steering:

  Programmable dead time

  Auto-shutdown and Auto-restart

  Master Synchronous Serial Port (MSSP) module with two modes of operation:

  3-wire SPI (supports all 4 SPI modes)

  I2C? Master and Slave modes (Slave mode with address masking)

  Enhanced Universal Synchronous Asynchronous Receiver Transmitter module (EUSART)

  Supports RS-232, RS-485 and LIN 2.0

  Auto-Baud Detect

  SR Latch (555 Timer) module with:

  Confi gurable inputs and outputs

  Supports mTouch? capacitive sensing applications