The PIC32MM family is Microchip's lowest power and most cost-effective family of 32-bit PIC32 microcontrollers. ?For applications demanding low power, longer battery life and space?constraints, the PIC32MM devices offer sleep modes down?to 500 nA and packages as small as 4 × 4 mm.

This family?features core independent peripherals, designed to offload?the CPU, such as Configurable Logic Cells (CLC) and?Multiple-output Capture Compare PWMs (MCCPs) which?help enable sensorless BLDC motor control applications.?The PIC32MM devices achieve a 79 CoreMark? score?at 25 MHz operation, featuring the compact microMIPS??instructions, microAptiv? UC core and a shadow register?set for fast interrupt context switching. The microMIPS ISA?combines 16-bit and 32-bit instructions for compact code?size.

The PIC32MM devices are supported by Microchip’s?MPLAB? Code Configurator (MCC) to help simplify designs. ?Target applications include IoT sensor nodes, connected thermostats, environmental monitoring devices, portable medical or fitness devices, building automation and low cost motor control applications.

  ?Operating Conditions

  2.0V to 3.6V, -40oC to +85oC, DC to 25 MHz

  ?Low-Power Operation

  500 nA Sleep Current for RAM Retention mode?

  5 μA for Sleep with Regulator Standby mode

  2 μA for lowest Sleep Mode with RTCC

  High-Performance 32-Bit RISC CPU?

  79 CoreMark performance at 25MHz operation

  microAptiv? UC 32-Bit Core with 5-Stage Pipeline

  microMIPS? Instruction Set for 35% Smaller Code and 98% Performance compared to MIPS32 Instructions

  Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency?

  16-Bit/32-Bit Wide Instructions with 32-Bit Wide Data Path

  Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency

  Single-Cycle 32x16 Multiply and Two-Cycle 32x32 Multiply

  Hardware Divide Unit

  Zero Wait State Flash with ECC to Maximize Endurance/Retention?

  ?Memory

  Up to 64K ECC Flash Memory

  Up to 8K Data Memory

  Analog Features

  Up to 14-Channel, Software-Selectable 10/12-Bit SAR Analog-to-Digital Converter (ADC):

  12-bit, 200K samples/second conversion rate (single Sample-and-Hold)

  10-bit, 300K samples/second conversion rate (single Sample-and-Hold)

  Two Analog Comparators with Input Multiplexing

  5-Bit DAC with Output Pin

  ?Peripheral Features?

  Two 4-Wire SPI modules (up to 25 Mbps) with I2S

  Two UART modules with LIN

  CRC module

  Hardware Real-Time Clock and Calendar (RTCC)

  Up to 20 Peripheral Pin Select (PPS) Remappable Pins

  Seven Total 16-Bit Timers:

  Timer1: Dedicated 16-bit timer/counter

  Two additional 16-bit timers in each MCCP and SCCP module

  Capture/Compare/PWM/Timer modules:

  Two 16-bit timers or one 32-bit timer in each module

  PWM resolution down to 21 ns

  One Multiple Output (MCCP) module:

  Flexible configuration as PWM, input capture, output compare or timers

  Six PWM outputs

  Programmable dead time

  Auto-shutdown

  Two Single Output (SCCP) modules:

  Flexible configuration as PWM, input capture, output compare or timers

  Single PWM output

  Two Configurable Logic Cells (CLC) with Internal Connections to Select Peripherals and PPS

  Small Footprint Packages

  4x4 mm in 20 QFN and 28 UQFN

  5x5 mm in 40 uQFN

  6x6 mm in 28 QFN and 36 QFN