描述 The TPS6122x family devices provide a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm × 2 mm to enable small circuit layout size.特性Up to 95% Efficiency at Typical Operating Conditions 5.5 μA Quiescent Current Startup Into Load at 0.7 V Input Voltage Operating Input Voltage from 0.7 V to 5.5 V Pass-Through Function during ShutdownMinimum Switching Current 200 mA Protections: Output Overvoltage Overtemperature Input Undervoltage Lockout Adjustable Output Voltage from 1.8 V to 6 V Fixed Output Voltage Versions Small 6-pin SC-70 Package