These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.

The LM193 device is characterized for operation from ?55°C to +125°C. The LM293 and LM293A devices are characterized for operation from ?25°C to +85°C. The LM393 and LM393A devices are characterized for operation from 0°C to 70°C. The LM2903, LM2903V, and LM2903AV devices are characterized for operation from ?40°C to +125°C.

• Single-Supply or Dual Supplies

• Wide Range of Supply Voltage

• Maximum Rating: 2 V to 36 V

• Tested to 30 V: Non-V Devices

• Tested to 32 V: V-Suffix Devices

• Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator

• Low Input Bias Current: 25 nA (Typical)

• Low Input Offset Current: 3 nA (Typical) (LM193)

• Low Input Offset Voltage: 2 mV (Typical)

• Common-Mode Input Voltage Range 
  Includes Ground

• Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V

• Low Output Saturation Voltage

• Output Compatible With TTL, MOS, and CMOS

• On Products Compliant to MIL-PRF-38535,
  All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)